EnglishEnglish DeutschDeutsch русскийрусский españolespañol portuguêsportuguês 日本語日本語 中文中文
Xiamen Fuste Rubber & Plastic Co., Ltd
bannerny

Blog

Home

Blog

  • 12

    Dec 2019

    Air Intake rubber pipe

    The air intake pipe is divided into an intake manifold and an intake manifold. The intake manifold is generally a plastic hose with a larger pipe diameter; the intake manifold is generally cast directly from aluminum alloy with the same number as the number of engine cylinders. Intake pipe refers to the air that enters from the air inlet and passes through the air filter until it enters each cylin...
  • 18

    Dec 2019

    Rubber Hose | Xiamen Fuste Rubber & Plastic Co., Ltd.

    The characteristics of rubber hose are physiological inertness, UV resistance, ozone resistance, high and low temperature resistance (-80 to 300 degrees), high transparency, strong resilience, compression and permanent deformation, oil resistance, stamping resistance, acid and alkali resistance, wear resistance, Flame resistance, voltage resistance, conductivity and other properties. It is mainly ...
  • 17

    Jan 2020

    Fluororubber Products

    The main characteristics of fluororubber are high temperature and chemical resistance, good resistance to aging and ozone, and very low air permeability. Even under very severe working conditions, it still has very good wear resistance. Fluorine rubber can withstand an operating temperature of +200 degrees or below, and it can also be operated without oil for a short time. Fluororubber can resist ...
  • 17

    Mar 2020

    Rubber intake hose

    Rubber intake hose is widely used in automobile engines, and other mechanical equipment. It has good sealing performance, high and low temperature resistance, and long life span. It is also known as the "respiratory tract of a car engine". The intake hose is composed of an intake manifold and an intake manifold. The air enters from the air inlet and passes through the air filter. This section of h...
  • 20

    Mar 2020

    Silicone Hose Silicone Tube China

    Silicone tube: also known as silicone tube. It is used as carrier for liquid, gas and other materials circulating and coating. High Pressure Silicone hose is a kind of rubber tube, oil-resistant and heat-resistant. Silicone tube is made by adding raw material of silicone rubber to a double-roller mixer or a closed kneader, and gradually adding white carbon and other additives to repeatedly refinin...
  • 22

    Mar 2020

    Rubber seals

    Rubber seals are one of the most commonly used sealing materials and have a very wide range of applications. The sealing ring is mainly used to prevent oil, water and corrosion and seal the gas to prevent leakage. There are many types of sealing rings. Depending on the materials used for the sealing rings, different classifications are generated in nature. Classified by form: O-ring, Y-ring, V-rin...
First 1 2 3 4 5 6 7 8 Last
[  A total of  8 pages  ]
 
Got Free Inquiry Now We will contact you as soon as possible!
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!