EnglishEnglish DeutschDeutsch русскийрусский españolespañol portuguêsportuguês 日本語日本語 中文中文
Xiamen Fuste Rubber & Plastic Co., Ltd
bannerny

Blog

Home

Blog

  • 10

    Sep 2019

    Design of new rubber harness sheath

    The conventional rubber wire harness sheath generally has a circular hole in the middle of the sheath to pass the wire harness, and then a sleeve or a tail is designed on one side or both sides of the through hole to facilitate binding the wire harness and the rubber sheath with tape. , using the two does not produce relative movement. However, when the vehicle is at a non-uniform speed or the ang...
  • 16

    Sep 2019

    Customized auto rubber tube

    The structure and materials of automotive rubber hoses vary according to their use, performance, function, medium used, and ambient temperature. The selection of rubber materials plays a decisive role in the performance of hoses. Automobile hoses are in contact with various media, and the use conditions are harsh and technical requirements are harsh. It is a composite rubber product with many vari...
  • 14

    Nov 2019

    Xiamen Fuste Rubber Tube

    With the application of unleaded gasoline and electrospraying devices in automobiles, the structure of the fuel hose has undergone great changes in the material, and the inner rubber layer has been developed to replace the nitrile rubber with fluororubber, chlorohydrin rubber or acrylate rubber. In order to reduce fuel permeability and further improve heat resistance, the inner layer rubber is mos...
  • 06

    Dec 2019

    Rubber seal ring

    Rubber seal ring is a ring cover composed of one or several parts, which is fixed on one ring or washer of the bearing and contacts with another ring or washer to form a narrow labyrinth. There are O-ring, Y-ring, V-ring and so on, which are used to install on various mechanical equipment, and play a sealing role in static or moving state under the specified temperature and pressure as well as in ...
  • 12

    Dec 2019

    Air Intake rubber pipe

    The air intake pipe is divided into an intake manifold and an intake manifold. The intake manifold is generally a plastic hose with a larger pipe diameter; the intake manifold is generally cast directly from aluminum alloy with the same number as the number of engine cylinders. Intake pipe refers to the air that enters from the air inlet and passes through the air filter until it enters each cylin...
  • 12

    Dec 2019

    Rubber cushion washer

    Rubber flat washer: it is easy to deform and compact, but its pressure and temperature resistance are poor, so it is only used in places with low pressure and low temperature. Natural rubber has a certain acid-base resistance, and the service temperature should not exceed 60 ℃; silicone can also be high temperature resistant and the service temperature is 200 ℃; NBR rubber can be resistant to oil,...
First 1 2 3 4 5 6 7 8 9 10 Last
[  A total of  22 pages  ]
 
Got Free Inquiry Now We will contact you as soon as possible!
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!