From the current consumer consumption of silica gel products, natural silica gel consumption rate is several percentage points higher than synthetic silica gel consumption rate.The market can develop synthetic silica gel products and increase the occupancy rate of synthetic silica gel products. Then the consumption will increase accordingly, and the market space will further increase. Just as the ...
EPDM is ethylene, propylene, mix a small amount of the conjugate olefin copolymer, is one of the types of ethylene propylene rubber, expressed in EPDM, because its main chain is made up of chemical stability of saturated hydrocarbon, and only in the side chain containing unsaturated double bond, so the ozone resistance, heat resistance, excellent weather resistance and aging resistance, can be wid...
Rubber is the general term of a class of products, including many kinds, silicone gel is also one of the specific varieties of rubber. Rubber is widely used in our company, mainly used in automotive parts, such as automotive rubber gasket, automotive rubber mat, rubber bellows, rubber shock absorber pad, etc.Electronics, equipment, transport and other industries, bathroom equipment and fitness equ...
The most important characteristics of EPDM are the ability to resist oxidation, ozone and erosion, as well as excellent vulcanization.Among all the rubber industries, EPDM has the lowest proportion. It can absorb a large amount of fillers and oils with little influence, so it can produce rubber compounds with lower cost. By adding EPDM material, it can have higher tensile and tearing strength, hig...
In many car mat material, rubber and plastic is the most widely used, which mainly benefits from rubber and plastic material itself excellent skid resistance, wear resistance, anti-static, pollution resistance and other properties, an excellent rubber, plastic pad pollution resistance ability, convenient cleaning, by the majority of car owners love and welcome.What need to notice nevertheless is, ...
The conventional rubber wire harness sheath generally has a circular hole in the middle of the sheath to pass the wire harness, and then a sleeve or a tail is designed on one side or both sides of the through hole to facilitate binding the wire harness and the rubber sheath with tape. , using the two does not produce relative movement. However, when the vehicle is at a non-uniform speed or the ang...
online service
