-
With the application of unleaded gasoline and electrospraying devices in automobiles, the structure of the fuel hose has undergone great changes in the material, and the inner rubber layer has been developed to replace the nitrile rubber with fluororubber, chlorohydrin rubber or acrylate rubber. In order to reduce fuel permeability and further improve heat resistance, the inner layer rubber is mos...
-
The structure and materials of automotive rubber hoses vary according to their use, performance, function, medium used, and ambient temperature. The selection of rubber materials plays a decisive role in the performance of hoses. Automobile hoses are in contact with various media, and the use conditions are harsh and technical requirements are harsh. It is a composite rubber product with many vari...
-
The conventional rubber wire harness sheath generally has a circular hole in the middle of the sheath to pass the wire harness, and then a sleeve or a tail is designed on one side or both sides of the through hole to facilitate binding the wire harness and the rubber sheath with tape. , using the two does not produce relative movement. However, when the vehicle is at a non-uniform speed or the ang...
-
1. Silicone Gasket: Silicone products are widely used in electronics, medical equipment, food and other industries. The rubber type is selected from a variety of domestic and imported silica gels, and the use temperature can meet -60°~+200°. The product can meet the oil resistance, steam resistance, medical edible full transparency, high strength, flame retardant, conductive silicone rubber, etc. ...
-
In many car mat material, rubber and plastic is the most widely used, which mainly benefits from rubber and plastic material itself excellent skid resistance, wear resistance, anti-static, pollution resistance and other properties, an excellent rubber, plastic pad pollution resistance ability, convenient cleaning, by the majority of car owners love and welcome.What need to notice nevertheless is, ...
-
1.Type O sealing ring: type O sealing ring are widely used in all kinds of machinery, all kinds of petroleum base oil and various chemical medium resistance: don't use analysing can meet - 60 c ~ + 200 degrees Celsius (double fluoro rubber FFKM after vulcanization in a certain way can reach more than 300 degrees), the temperature of the area, using the pressure range: < 10 mpa (hydraulic), <...
-
Rubber gasket is to use rubber made after moulding, cutting, acid and alkali resistant, oil resistant, aging resistant, flame retardant, antistatic function, can be directly cut into various shapes of sealing gaskets, flexible cutting shape, is widely used in electronics, food, chemical, pharmaceutical and other industries, is a common life. There are silicone gaskets, nitrile rubber gaskets, chlo...
-
The most important characteristics of EPDM are the ability to resist oxidation, ozone and erosion, as well as excellent vulcanization.Among all the rubber industries, EPDM has the lowest proportion. It can absorb a large amount of fillers and oils with little influence, so it can produce rubber compounds with lower cost. By adding EPDM material, it can have higher tensile and tearing strength, hig...
-
Rubber seal is a kind of general basic element in the sealing device. The high elasticity of rubber plays an important role in the contradiction between leakage and sealing, and it is widely used in daily life.Common seals in our lives have sealing ring, rubber gasket, rubber o-ring, v-ring, y-ring and so on. Rubber has high elasticity at room temperature. It is the only polymer material with high...
online service
