-
A rubber molded product is a product that is made by mixing a mixed rubber blank into a mold and pressed by a flat plate vulcanizer under specified conditions of time, pressure, and temperature, and is called a rubber molded product. Rubber molded products are special products with the most varieties and applications in rubber products. Its characteristics are: easy manufacture, accurate appearanc...
-
Rubber foot pads are generally made of rubber. Because of its high resilience and tensile strength, strong toughness, and good shock and cushioning properties, it is often used to protect the main parts from accidental drops or wear. Rubber foot pads are divided according to material. The main products are silicone rubber foot pads, Nitrile Butadiene rubber foot pads, ethylene-propylene rubber foo...
-
Rubber seals are one of the most commonly used sealing materials and have a very wide range of applications. The sealing ring is mainly used to prevent oil, water and corrosion and seal the gas to prevent leakage. There are many types of sealing rings. Depending on the materials used for the sealing rings, different classifications are generated in nature. Classified by form: O-ring, Y-ring, V-rin...
-
Silicone tube: also known as silicone tube. It is used as carrier for liquid, gas and other materials circulating and coating. High Pressure Silicone hose is a kind of rubber tube, oil-resistant and heat-resistant. Silicone tube is made by adding raw material of silicone rubber to a double-roller mixer or a closed kneader, and gradually adding white carbon and other additives to repeatedly refinin...
-
Rubber intake hose is widely used in automobile engines, and other mechanical equipment. It has good sealing performance, high and low temperature resistance, and long life span. It is also known as the "respiratory tract of a car engine". The intake hose is composed of an intake manifold and an intake manifold. The air enters from the air inlet and passes through the air filter. This section of h...
-
In order to prevent dust from entering various delicate parts in daily equipment, people often install rubber grommets to protect the parts. Due to different use environments, the properties of rubber grommet need to be different, and the choice of raw materials is also different. Recycled rubber is a commonly used raw material to ensure quality and reduce costs in the production of rubber product...
-
The main characteristics of fluororubber are high temperature and chemical resistance, good resistance to aging and ozone, and very low air permeability. Even under very severe working conditions, it still has very good wear resistance. Fluorine rubber can withstand an operating temperature of +200 degrees or below, and it can also be operated without oil for a short time. Fluororubber can resist ...
-
Rubber plugs, as one of the more common types of industrial accessories, have strong advantages, such as dust Comparison of silicone plugs and rubber plugs and water resistance, wear resistance, tear resistance, aging resistance, oil seals, and ozone radiation. The rubber material is divided into many types. Among them, the material can be made from dozens of chemical raw materials. Therefore, for...
-
As the network main body of a car's circuit, a car harness protective cover composed of wires, connectors, rubber parts, and wrapping tape is a very important car component. As people's requirements for automotive safety, comfort, economy, and emissions increase, higher requirements have also been placed on automotive wiring harness protective sleeves, such as a wide temperature range, good elasti...
online service
