EnglishEnglish DeutschDeutsch русскийрусский españolespañol portuguêsportuguês 日本語日本語 中文中文
Xiamen Fuste Rubber & Plastic Co., Ltd
bannerny

Blog

Home

Blog

  • 22

    Sep 2020

    Supply high quality rubber gasket

    Rubber gasket is now the most basic and widely used gasket. It is made of synthetic rubber that vulcanized with polymers, added fillers, pigments and various additives. Synthetic rubber has very excellent compressibility and resilience. Only need very little pre tightening force, this  rubber can play a role of effective sealing under low temperature low pressure conditions. Rubber gasket is ...
  • 27

    Sep 2020

    About Rubber sound insulation cushion content

    Rubber sound insulation cushion is a kind of building vibration insulation products made of pure rubber foam, with good sound insulation, waterproof and moisture-proof, non-toxic environmental protection, heat insulation, good resilience, light weight, long service life and other characteristics. It is professional sound insulation supplies used to solve the problem of building noise. This kind of...
  • 29

    Sep 2020

    Rubber Crash Pad

    Rubber crash pads are widely equipped in the chairs of automobiles, ships, air crafts and other vehicles, furniture so on, which serves as support of passengers’ thigh and butt. If the stiffness of the lower buttock of the cushion is matched with the stiffness of the leg support, the leg will feel numbness or pressure, foreign body sensation, resistance sensation (hereinafter uniformly referred to...
  • 29

    Sep 2020

    Rubber bearings used in bridge engineering

    1.Plate rubber bearing: except under special conditions (cold areas), it has basically replaced the commonly used bearings like linoleum cushion, curved steel plate, reinforced concrete pendulum and other forms. The allowable compressive stress of rectangular and circular bearings is 10MPa, which is suitable for Bridges with small spans. It is not suitable to use spherical crown rubber bearings or...
  • 10

    Oct 2020

    O - ring applicable scope

    O-ring seals are suitable for installation in a variety of mechanical equipment, which seals in specified temperature, pressure, as well as different liquid and gas medium, in the static or movement state. A large number of various types of sealing components are applied in machine tools, ships, automobiles, aerospace equipment, metallurgical machinery, chemical machinery, engineering machinery, c...
  • 10

    Oct 2020

    The advantages of O-rings

    The working life of O-ring under dynamic pressure is 5-10 times higher than that of conventional rubber sealing products. Compared with other types of sealing rings, The O-ring has the following advantages: 1.Suitable for both dynamic and static sealing conditions; 2.Suitable for a variety of motion modes: rotary motion, axial reciprocating motion or combined motion (such as rotary reciprocating m...
[  A total of  22 pages  ]
 
Got Free Inquiry Now We will contact you as soon as possible!
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!